https://doi.org/10.4081/bse.176
Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization
Published: 29 September 2021
Abstract Views: 657
PDF: 210
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Two biaxial mechanical test methods were devised to compare their suitability for the mechanical characterization of soft biological tissues with the least possible tissue waste. Nanoindentation was used to explore the microscopic properties of the tissue and to overcome the macroscopic test limitations.
1. Negishi J, Hashimoto Y, Yamashita A, Zhang Y, Kimura T, Kishida A, Funamoto S. Evaluation of small-diameter vascular grafts reconstructed from decellularized aorta sheets. J Biomed Mater Res A 2017;105:1293-8.
2. Hiester ED, Sacks MS. Optimal bovine pericardial tissue selection sites. I. Fiber architecture and tissue thickness measurements. J Biomed Mater Res 1998;39:207–14.
3. Hiester ED, Sacks MS. Optimal bovine pericardial tissue selection sites. II. Cartographic analysis. J Biomed Mater Res 1998;39:215–221.
4. Billiar KL, Sacks MS. Biaxial mechanical properties of the natural and glutaraldehyde treated aortic valve cusp--Part I: Experimental results. J Biomech Eng 2000;122:23-30.
5. Sun W, Sacks MS, Sellaro TL, et al. Biaxial mechanical response of bioprosthetic heart valve biomaterials to high in-plane shear. ASME. J Biomech Eng 2003;125:372–80.
6. Sacks MS, Sun W. Multiaxial mechanical behavior of biological materials. Annu Rev Biomed Eng 2003;5:251-84.
2. Hiester ED, Sacks MS. Optimal bovine pericardial tissue selection sites. I. Fiber architecture and tissue thickness measurements. J Biomed Mater Res 1998;39:207–14.
3. Hiester ED, Sacks MS. Optimal bovine pericardial tissue selection sites. II. Cartographic analysis. J Biomed Mater Res 1998;39:215–221.
4. Billiar KL, Sacks MS. Biaxial mechanical properties of the natural and glutaraldehyde treated aortic valve cusp--Part I: Experimental results. J Biomech Eng 2000;122:23-30.
5. Sun W, Sacks MS, Sellaro TL, et al. Biaxial mechanical response of bioprosthetic heart valve biomaterials to high in-plane shear. ASME. J Biomech Eng 2003;125:372–80.
6. Sacks MS, Sun W. Multiaxial mechanical behavior of biological materials. Annu Rev Biomed Eng 2003;5:251-84.
How to Cite
Lugas, A. T., Serino, G., Terzini, M., Bignardi, C., & Audenino, A. L. (2021). Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.176
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Gianpaolo Serino, Andrea T. Lugas, Giacomo Bernava, Sara Ragazzini, Stefano Gabetti, Mara Terzini, Umberto Morbiducci, Alberto Audenino, Maurizio Pesce, Diana Massai, PDMS Substrates with tunable stiffness for cardiac mechanobiology investigation: A nanoindentation study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Federico A. Bologna, Mara Terzini, Andrea T. Lugas, Alberto L. Audenino, Minimum performance level definition for bone plate testing according to standard: A preliminary study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Michela Licciardello, Gianluca Ciardelli, Chiara Tonda-Turo, An in vitro lung biomimetic model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Ermes Botte, Pietro Vagaggini, Joana Costa, Lara Faccani, Ilaria Zanoni, Anna Costa, Arti Ahluwalia, A novel in silico tool for dose assessment in cell culture nanotoxicology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Erica Zucchetti, Leonardo Ling, Daniela Monti, Patrizia Chetoni, Silvia Tampucci, Susi Burgalassi, Polyvinyl alcohol/cellulose hydrogel as possible corneal stroma substitute in drug permeation tests , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Ryan Conder, Leon H. Chew, Fisal Elstone, Marianne Lankhorst, Adam Añonuevo, Salvatore Simmini, Wing Chang, Allen C. Eaves, Terry E. Thomas, Sharon A. Louis, Organoid culture systems: Products supporting one of the biggest revolutions in biological research , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Ludovica Cacopardo, Joana Costa, Nicole Guazzelli, Serena Giusti, Sandro Meucci, Alessandro Corti, Giorgio Mattei, Arti Ahluwalia, Real-time cellular impedance monitoring and imaging in a dual-flow bioreactor , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Paola Occhetta, Roberta Visone, Stefano Piazza, Ferran Lozano, Marco Rasponi, Beating organs-on-chip as technological platforms in drug screening: advanced in vitro models of human physiology and pathology , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Barbara Parodi, Biobanking and biomolecular resource research infrastructure: The Italian node , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Michela Sperti, Fabrizio D'Ascenzo, Luca Navarini, Giacomo Di Benedetto, Antonella Afeltra, Roberto Giacomelli, Marco A. Deriu, Machine learning approaches as an alternative to traditional statistical methods in cardiovascular risk prediction , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Marta Vicentini, Marta Vassallo, Riccardo Ferrero, Alessandra Manzin, In silico experiments as a tool to reduce preclinical tests of magnetic hyperthermia , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Erica Zucchetti, Daniela Monti, Patrizia Chetoni, Silvia Tampucci, Susi Burgalassi, Reconstituted epithelial tissues and native cornea: A comparison of the influence of surfactants on ocular permeability , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
