https://doi.org/10.4081/bse.154
Minimum performance level definition for bone plate testing according to standard: A preliminary study
Published: 29 September 2021
Abstract Views: 340
PDF: 267
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
In silico modeling of osteosynthesis medical devices allows the reduction of the time required for experimental tests and the introduction of “simulation-driven designâ€. Using a wise combination of these techniques and analytical calculations, it is possible to relate the experimental results, which are mandatory for regulatory purposes, to the plate physiological application and prevent the occurrence of complications in the early stages after the orthopedic device implantation on humans and animals.
How to Cite
Bologna, F. A., Terzini, M., Lugas, A. T., & Audenino, A. L. (2021). Minimum performance level definition for bone plate testing according to standard: A preliminary study. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.154
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Andrea T. Lugas, Gianpaolo Serino, Mara Terzini, Cristina Bignardi, Alberto L. Audenino, Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianpaolo Serino, Andrea T. Lugas, Giacomo Bernava, Sara Ragazzini, Stefano Gabetti, Mara Terzini, Umberto Morbiducci, Alberto Audenino, Maurizio Pesce, Diana Massai, PDMS Substrates with tunable stiffness for cardiac mechanobiology investigation: A nanoindentation study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Eric A. Zizzi, Marco Cavaglià, Marco A. Deriu, Jack A. Tuszynski, In silico investigation of molecular interactions of volatile anesthetics: effects on phospholipid membranes and subcellular targets , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- E. Marcello, G. P. Stola, C. Paoletti, L. Nicoletti, V. Chiono, Alginate dialdehyde-gelatin bioinks exploiting internal gelation mechanism for cardiac tissue engineering , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Swee Leong Sing, Yixin Miao, Florencia Edith Wiria, Wai Yee Yeong, Manufacturability and mechanical testing considerations of metallic scaffolds fabricated using selective laser melting: a review , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Anna Maria Bassi, Teaching and training in substitutive approaches to animal testing: Commitment of the University of Genoa , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- M. Spedicati, A. Zoso, I. Carmagnola, V. Chiono, In vitro model of the human esophageal epithelium by tissue engineering tools , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Maurizio Lodi Rizzini, Paola Tasso, Anastasios Raptis, Miltiadis Matsagkas, Diego Gallo, Michalis Xenos, Umberto Morbiducci, Patient-specific modelling for the assessment of the hemodynamics risk of failure in endovascular aneurysm repair , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianvito Grasso, Lorenzo Pallante, Jack A. Tuszynski, Umberto Morbiducci, Marco A. Deriu, Computational molecular modelling as a platform for a deeper understanding of protein dynamics and rational drug design , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- B. Masante, S. Gabetti, D. Baruffaldi, S. Villata, A. Sanginario, A. L. Audenino, F. Frascella, D. Massai, Biomimetic air-liquid interface milli-bioreactor for skin tissue engineering applications , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Monica Boffito, Arianna Grivet Brancot, Ornella Lima, Simona Bronco, Susanna Sartori, Gianluca Ciardelli, Injectable thermosensitive gels for the localized and controlled delivery of biomolecules in tissue engineering/regenerative medicine , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
