https://doi.org/10.4081/bse.154
Minimum performance level definition for bone plate testing according to standard: A preliminary study
Published: 29 September 2021
Abstract Views: 340
PDF: 267
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
In silico modeling of osteosynthesis medical devices allows the reduction of the time required for experimental tests and the introduction of “simulation-driven designâ€. Using a wise combination of these techniques and analytical calculations, it is possible to relate the experimental results, which are mandatory for regulatory purposes, to the plate physiological application and prevent the occurrence of complications in the early stages after the orthopedic device implantation on humans and animals.
How to Cite
Bologna, F. A., Terzini, M., Lugas, A. T., & Audenino, A. L. (2021). Minimum performance level definition for bone plate testing according to standard: A preliminary study. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.154
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Andrea T. Lugas, Gianpaolo Serino, Mara Terzini, Cristina Bignardi, Alberto L. Audenino, Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianpaolo Serino, Andrea T. Lugas, Giacomo Bernava, Sara Ragazzini, Stefano Gabetti, Mara Terzini, Umberto Morbiducci, Alberto Audenino, Maurizio Pesce, Diana Massai, PDMS Substrates with tunable stiffness for cardiac mechanobiology investigation: A nanoindentation study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Valeria Chiono, Jochen Salber, Drug-Free Antibacterial Technology for Medical Applications - First Cambridge International Conference - December 14th, 2018 - Cambridge, UK , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Adelaide Dura, Marcelle Holloway, Characterising the current provision of education and training courses relevant to the Replacement, Reduction and Refinement (Three Rs) of animals used for scientific purposes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Chantra Eskes, Swiss 3R Competence Centre: Promoting the 3Rs implementation , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- E. L. Viganò, A. Roncaglioni, D. Ballabio, From data exploration to predictive models: advanced Machine Learning and Artificial Intelligence techniques for cardiotoxicity analysis , Biomedical Science and Engineering: Vol. 5 No. 1 (2024)
- Emanuele Gasparotti, Margherita Cioffi, Vincenzo Positano, Emanuele Vignali, Benigno Marco Fanni, Katia Capellini, Dorela Haxhiademi, Emiliano Costa, Sergio Berti, Luigi Landini, Simona Celi, Laura Gribaldo, Analysis of non-animal methods and models for research in cardiovascular disease , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Stefania Forciniti, Marta Cavo, Ilaria Dando, Elisa Dalla Pozza, Marta Palmieri, Loretta L. del Mercato, Promising 3D in vitro models for studying tumour heterogeneity and testing novel therapeutic approaches in pancreatic cancer , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Sara Tirendi, Stefania Vernazza, Sergio Saccà, Anna Maria Bassi, Assessment of an in vitro physiological relevant model to check therapeutic strategies for glaucoma , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Federica Rusinà, Alice Ravizza, Stefano Pasquino, Mario Muto, Simulated models for testing performance of a radiofrequency ablation device for spine tumors , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Flaminia Aliberti, Lorenza Rinvenuto, Giada Loi, Laura Benedetti, Franca Scocozza, Flavio Lorenzo Ronzoni, Maurilio Sampaolesi, Gabriella Cusella, Michele Conti, Gabriele Ceccarelli, Comparative analysis of different hydrogels for the bioprinting of 3D in vitro skeletal muscle models , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Licia Di Pietro, Alice Ravizza, Giovanni Vozzi, Andrés Diaz Lantada, Arti Ahluwalia, Carmelo De Maria, European regulatory framework for the clinical translation of bioprinted scaffolds and tissues , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
