https://doi.org/10.4081/bse.154
Minimum performance level definition for bone plate testing according to standard: A preliminary study
Published: 29 September 2021
Abstract Views: 340
PDF: 267
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
In silico modeling of osteosynthesis medical devices allows the reduction of the time required for experimental tests and the introduction of “simulation-driven designâ€. Using a wise combination of these techniques and analytical calculations, it is possible to relate the experimental results, which are mandatory for regulatory purposes, to the plate physiological application and prevent the occurrence of complications in the early stages after the orthopedic device implantation on humans and animals.
How to Cite
Bologna, F. A., Terzini, M., Lugas, A. T., & Audenino, A. L. (2021). Minimum performance level definition for bone plate testing according to standard: A preliminary study. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.154
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Andrea T. Lugas, Gianpaolo Serino, Mara Terzini, Cristina Bignardi, Alberto L. Audenino, Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianpaolo Serino, Andrea T. Lugas, Giacomo Bernava, Sara Ragazzini, Stefano Gabetti, Mara Terzini, Umberto Morbiducci, Alberto Audenino, Maurizio Pesce, Diana Massai, PDMS Substrates with tunable stiffness for cardiac mechanobiology investigation: A nanoindentation study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Andrea T. Lugas, Gianpaolo Serino, Mara Terzini, Cristina Bignardi, Alberto L. Audenino, Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianpaolo Serino, Andrea T. Lugas, Giacomo Bernava, Sara Ragazzini, Stefano Gabetti, Mara Terzini, Umberto Morbiducci, Alberto Audenino, Maurizio Pesce, Diana Massai, PDMS Substrates with tunable stiffness for cardiac mechanobiology investigation: A nanoindentation study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Ayesha Idrees, PatrÃcia Varela, Francesca Ruini, Jeddah Marie Vasquez, Jochen Salber, Udo Greiser, Wenxin Wang, Sean McMahon, Susanna Sartori, Gianluca Ciardelli, Valeria Chiono, Drug-free antibacterial polymers for biomedical applications , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Irene Carmagnola, Tiziana Nardo, Francesca Boccafoschi, Valeria Chiono, Layer-by-layer coating of stainless steel plates mediated by surface priming treatment to improve antithrombogenic properties , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Marco Campisi, Sharon W. L. Lee, Tatsuya Osaki, Luca Possenti, Clara Mattu, Giulia Adriani, Valeria Chiono, Roger D. Kamm, In vitro microfluidic modelling of the human blood-brain-barrier microvasculature and testing of nanocarrier transport , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Stefano Gabetti, Giovanni Putame, Federica Montrone, Giuseppe Isu, Anna Marsano, Alberto Audenino, Diana Massai, Versatile electrical stimulator for providing cardiac-like electrical impulses in vitro , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Elena Torta, Giuseppe Carlo Alp Caridi, Claudio Chiastra, Diego Gallo, Umberto Morbiducci, A compact in vitro test bench for cardiovascular flow analysis , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Francesca Ruini, Chiara Tonda-Turo, Stefania Raimondo, Pierluigi Tos, Pierfrancesco Pugliese, Stefano Geuna, Gianluca Ciardelli, Nerve guidance conduits based on bi-layer chitosan membranes for peripheral nerve regeneration , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
