https://doi.org/10.4081/bse.200
Electrostimulation of a 3D in vitro skin model to activate wound healing
Published: 29 September 2021
Abstract Views: 593
PDF: 296
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
The aim of the work is to propose a methodology for the stimulation of a 3D in vitro skin model to activate wound healing. The presented work is in the frame of the national research project, CronXCov, "Checking the CHRONIC to prevent COVID-19", devoted to understand how physiologic and inflamed skin on chip 3D models evolve upon a range of physical (e.g., electrical, mechanical, optical) stimulations, over time. Thanks to the 3D modelling, using Next Generation Sequencing and the network medicine frame of analysis to process the data, we will systematically characterize the effects of the applied stimuli, offering new insight for the exploitation of wound healing.
How to Cite
Villata, S., Napione, L., Baruffaldi, D., Nardini, C., Frascella, F., & Pirri, F. (2021). Electrostimulation of a 3D <em>in vitro</em> skin model to activate wound healing . Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.200
Copyright (c) 2021 The Authors
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Marta Canta, Désirée Baruffaldi, Ignazio Roppolo, Annalisa Chiappone, Candido F. Pirri, Francesca Frascella, 3D printed microfluidic devices for cell culture , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michael Zanon, Désirée Baruffaldi, Marco Sangermano, Candido Fabrizio Pirri, Francesca Frascella, Annalisa Chiappone, Visible light-induced cross-linking of unmodified gelatin with PEGDA for DLP-3D printable hydrogels , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Nicolò Cacocciola, Matteo Parmeggiani, Matteo Segantini, Alessio Verna, Désirée Baruffaldi, Simona Villata, Francesca Frascella, Simone Luigi Marasso, Giancarlo Canavese, Matteo Cocuzza, Fabrizio Candido Pirri, A programmable culture platform for stimulation and in situ sensing of lung epithelial cells , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianluca Palmara, Alessandro Chiadò, Annalisa Chiappone, Fabrizio Pirri, Ignazio Roppolo, Francesca Frascella, Angiogenesis biomarkers detection on a polymeric 3D printed device , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Désirée Baruffaldi, Marta Canta, Candido Fabrizio Pirri, Francesca Frascella, Development of in vitro 3D culture system to mimic lung cancer tissue , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Matteo Segantini, Matteo Parmeggiani, Alberto Ballesio, Francesca Frascella, Gianluca Palmara, Matteo Cocuzza, Candido Fabrizio Pirri, Simone Luigi Marasso, Design of a contamination-free microfluidic device for Electrolyte-Gated Organic Field-Effect Transistor (EGOFET) biosensors , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Elena Delgrosso, Gaia Martina Sarcinelli, Federica Riva, Federica Riva, Franca Scocozza, Michele Conti, Ian Postuma, Silva Bortolussi, Cinzia Ferrari, Bioprinting for osteosarcoma model: Methodological aspects and experimental applications , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Roberta Nossa, Joana Costa, Ludovica Cacopardo, Arti Ahluwalia, Engineering a dynamic model of the alveolar interface for the study of aerosol deposition , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Lorenzo P. Coppadoro, Elia Pederzani, Chiara Foglieni, Maria Lombardi, Gianfranco B. Fiore, Monica Soncini, Towards reliable in vitro models. New bi-compartmental platforms for replicating tissue barriers , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Francesco Nevelli, Renewing potency assays: Moving forward from traditional methods , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Erika Molica Colella, Silvia Dotti, Riccardo Villa, Guerino Lombardi, Massimo Amadori, Application of two in vitro methods for the toxicity test of autogenous vaccines , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- G. Cattelan, G. Gentile, C. Volani, L. S. Frommelt, A. Lavdas, L. Foco, M. De Bortoli, C. Altomare, L. Barile, S. Zacchigna, P. P. Pramstaller, I. Pichler, A. Zanon, A. Rossini, A novel human iPSC-based co-culture model to study neurocardiac interaction in vitro , Biomedical Science and Engineering: Vol. 5 No. 1 (2024)
- Anna M. Bassi, Sara Tirendi, Sonia Scarfì, Mario Passalacqua, Vanessa Almonti, Stefania Vernazza, A millifluidic-based 3D-platform as a useful tool for the efficacy of glaucoma therapeutic strategies , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Stefania Blasa, Valentina Pastori, Alessia D'Aloia, Marzia M. Lecchi, Differentiated neuroblastoma F-11 cells as an alternative in vitro model to dorsal root ganglion neurons , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michela Licciardello, Gianluca Ciardelli, Chiara Tonda-Turo, An in vitro lung biomimetic model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
You may also start an advanced similarity search for this article.
